INFCH
TABLE OF CONTENTS

Part 1: Introduction
1.1	Unpacking
1.2	Safety Considerations

Part 2: About the Meter
2.1	Description
2.2	Features
2.3	Available Accessories
2.4	Front of the Meter
2.5	Front-Panel Button Lock Out
2.6	Back of the Meter
2.7	Disassembly

Part 3: Getting Started
3.1	Rating/Product Label
3.2	Checking Main Board Power Jumpers
3.3	Connecting Main Power.
3.4	Connecting Analog and Relay Output Options
3.5	Mounting the Meter
3.6	Connecting Sensor Input

Part 4: Configuring the Meter
4.1	Selecting the Input Type
4.2	Selecting a Decimal Point Position
4.3	Using Reading Configuration
4.4	Using Setpoint 1 Configuration
4.4.1	Setting Setpoint 1's Active Band
4.4.2	Selecting if Setpoint 1 is Latched or Unlatched
4.5	Using Setpoint 2 Configuration
4.5.1	Setting Setpoint 2's Active Band
4.5.2	Selecting if Setpoint 2 is Latched or Unlatched
4.6	Setting the Setpoint 1 Deadband
4.7	Setting the Setpoint 2 Deadband
4.8	Using Output Configuration
4.8.1	Enabling or Disabling the Analog Output Option
4.8.2	Selecting Analog Output as Option Current or Voltage
4.9	Using Output Scale and Offset
4.9.1	Example for Output Scale and Offset
4.10	Correcting Thermistor Temperature Offset Error

Parts 5, 6, 7, 8, 9
5	SELECTING SETPOINT VALUES
6	DISPLAY MESSAGES
7	MENU CONFIGURATION DISPLAYS
8	SETPOINT CONFIGURATION DISPLAYS
9	SPECIFICATIONS
10	FACTORY PRESET VALUES
WARRANTY / DISCLAIMER
NOTES, WARNINGS AND CAUTIONS Information that is especially important to note is identified by three labels: NOTE WARNING CAUTION IMPORTANT Note: provides you with information that is important to successfully setup and use the Programmable Digital Meter. CAUTION or WARNING: tells you about the risk of electric shock. CAUTION, WARNING or IMPORTANT: tells you of circumstances or practices that can effect the meter's functionality and must refer to accompanying documents.